Industrial water-treatment chemicals for boilers, cooling systems, RO plants and specialised applications+91-22-47804040  |  WhatsApp +91 98670 36004
Home / RO Chemicals / WTROC1600
UDAAQ RO Chemicals · WTROC1600

Food Grade RO Membrane Acidic Cleaner

Regular chemical cleaning of RO membranes will help to increase its performance and will extend its useful life. The main concern with cleaning is that it should be done before the situation gets too bad as then the membrane may become fouled and will have to be replaced. Cleaning should be undertaken whenever the permeate flux differential pressure or condu

Food Grade RO Membrane Acidic Cleaner
Product overview

Food Grade RO Membrane Acidic Cleaner

Regular chemical cleaning of RO membranes will help to increase its performance and will extend its useful life. The main concern with cleaning is that it should be done before the situation gets too bad as then the membrane may become fouled and will have to be replaced. Cleaning should be undertaken whenever the permeate flux differential pressure or conductivity changes to undesirable values. However it is better to clean the membrane regularly after a predetermined interval. Each type of fouling requires a different cleaning strategy depending on the water supply membrane fouling may be inorganic organic microbiological or a combination. Our NSF Certified WTROC1600 - FOOD GRADE RO MEMBRANE ACIDIC CLEANER are specially designed chemicals that keep these contaminants from attaching to the membrane surface. They also prove economical in the long run. Our Acidic Cleaner is highly effective multipurpose cleaning chemical which very effectively removes deposits including carbonate silicate sulphate phosphate of Calcium Barium Strontium and Iron scales.

Product codeWTROC1600
CategoryRO Chemicals
Product form / packingForm: Liquid; Packing: 5KG / 20KG HEDP Polycan
Purchase / enquiryAvailable through Rakiro
Application and value

Where the product fits in a treatment programme.

Final selection and dosage should be based on current water analysis, system operating data, compatibility and product literature.

Typical applications

  • Industrial and drinking-water RO plants
  • Food, beverage and pharmaceutical water systems
  • Boiler-feed and process-water RO systems
  • Brackish-water membrane plants
  • Commercial and institutional RO systems
  • Membrane clean-in-place systems

Advantages and treatment objectives

  • Food Grade RO Plant Cleaning Treatment
  • NSF Certified for Drinking Water RO Treatment
  • Environment-friendly and Non-Toxic RO Treatment
  • Economical and Ready to use in 5/20 KG Pack
  • High Chemical Stability with Enhanced Cleaning action
  • Easy to handle with Rapid Action for Instant solution
  • Complete RO Plant Cleaning to Enhance life
  • Supports stable permeate flow
  • Helps protect membrane surfaces
  • Can reduce scaling and cleaning frequency
  • Supports membrane life and salt rejection
  • Allows treatment programmes to be matched to feedwater chemistry
  • Designed for targeted removal of specific membrane foulants during CIP

Parameters to monitor

  • Feed, permeate and reject conductivity
  • Normalised permeate flow
  • Differential pressure across membrane stages
  • Salt rejection
  • Feedwater pH, hardness, silica and alkalinity
  • Microbiological activity and cleaning frequency
Technical information

Specification and product documents.

Published specification

  • Form: Liquid
  • Packing: 5KG / 20KG HEDP Polycan
  • HSN: 38249022
  • Refer to Product Literature for Complete Product Specification

Safe implementation

Review the current TDS and SDS before storage, handling, dilution or dosing. Confirm material compatibility, PPE, dosing point and treatment residuals with the site water-treatment specialist.

Product FAQs

Common implementation questions.

How is the correct dosage selected?

Dosage depends on system volume or flow, water analysis, operating pressure or recovery, contaminant loading and the target residual. Start from the current product literature and optimise using measured results.

Can this product be selected only from the product name?

No. Similar problems can have different causes. Confirm the system type, water chemistry, metallurgy, operating conditions and existing treatment before changing the programme.

What should be monitored after starting treatment?

Monitor the application-specific parameters listed above, together with dosage, residual, system performance and equipment condition. Trend data is more useful than a single isolated reading.

Where can I obtain the latest TDS, MSDS or certificate?

Use the document links on this page where available, or contact Rakiro for the latest controlled copy.

WhatsApp us